When we continue to use a period of time, the stainless steel is prone to failure, such as shedding, leakage and other failures occur. However, the same series of stainless steel quick connector will appear more problems. So we should pay attention to the use of six points:
1) we use stainless steel, should carefully check if there is leakage, leakage should immediately stop using and replacement of new products, at the same time should confirm the gas torch valve closed after the connection.
2) stainless steel can not be used for purposes other than the joint, such as mixed metal powder or dust and other places, in this case are likely to cause the stainless steel cannot work or leaks.
3 when using the hose should be firmly inserted into the bottom of the interface, with a hose belt or nut solid
Set. Avoid the use of cracked hoses to prevent leakage and loss.
4 in the event of vibration and shock, the work should be stopped immediately if the work will reduce the durability of the machine.
5 use of such stainless steel joints should also be noted that the maximum pressure should not exceed the limit, the fluid used must be filtered through the filter clean fluid, which contains no other impurities.
6) when working, the temperature should be controlled within the scope of the use of stainless steel quick joints to prevent wear or leakage of the sealing material. The utility model can not be used to strike, bend and stretch joints to prevent joint damage.
So we are using stainless steel quick joints, should pay more attention to the above six points, so as not to cause problems.